Search

Configure your system to work with VoIP

  1. Open a browser and navigate to the IP address of your Icon. NOTE: This can be found on your Phone HD by tapping Start > System.
  2. Scroll down to the VoIP section and set the following:
    3. PBX Integration Enable PBX integration.
    SIP Username SIP username for the device.
    Authorization Username SIP server authorization username. Set a value only if required by the registrar or proxy.
    Authorization Password SIP server authorization password. Set a value only if required by the registrar or proxy.
    SIP Registrar When enabled, uses a SIP registrar.
    SIP Registrar Hostname Hostname or IP address of the SIP registrar.
    SIP Registration Select Direct or Through Proxy.
    Communication path to use when registering with a SIP registrar. SIP devices use register settings to dynamically register their current location.
    Enable SIP Proxy When enabled, uses a SIP proxy server.
    Proxy Hostname Hostname or IP address of the SIP proxy server.
    SIP Signaling Set the preferred SIP signaling protocol (TCP, UDP, or TLS). Signaling protocols are mutually exclusive; enabling one disables the others.
    To enable transport security for signaling, set the value to TLS.
  3. Click Save.