Smart-framing calibration

When you first install your Lifesize Icon 450 and pair to the Lifesize cloud-based service, you can set up smart-framing to calibrate to your huddle room environment. Smart-framing is disabled until the framing calibration process has been completed.

Learn more about pairing to the Lifesize cloud-based service.

At the end of the Lifesize pairing process, you will see an option to set up smart-framing. Select Yes to start the calibration process or select No to set up later and return the main screen of the Icon.

  1. Select Yes to start the calibration process.
  2. Choose the image that most closely matches your room lighting conditions.
  3. Stand or sit at the farthest position from the camera, within the area on the screen. When you are ready, click Start to begin calibration. This process may take up to two minutes. You will see a progress indicator and should stay within the area shown on the screen while the calibration process finishes. Some movement will enable the calibration process to complete more quickly.
  4. The smart-framing sensor calibration is now complete.

Follow these steps to set up smart-framing later.

  1. When not in a call, on Lifesize Phone HD select Camera. On the Camera screen, select Framing Calibrate.
  2. Select Yes to start the calibration process.
  3. Choose the image that most closely matches your room lighting conditions.
  4. Stand or sit at the farthest position from the camera, within the area on the screen. When you are ready, click Start to begin calibration. This process may take up to two minutes. You will see a progress indicator and should stay within the area shown on the screen while the calibration process finishes. Some movement will enable the calibration process to complete more quickly.
  5. The smart-framing sensor calibration is now complete.

To learn more, see Smart-framing FAQs.